Decking Kit

Manufactured from the finest European Redwood. Chose from 3 different sizes:- 2.4m x 2.5m; 3.0m x 2.5m; and 3.7m x 3.0m. More than one kit can be combined to cover a larger area, and 3.0m x 1.19m extension kits are also available. The kits contain all the fixings required to build your flat deck, and handrail kits in a variety of widths complete the package. For a raised deck just add 95mm posts to your shopping cart.

Each deck is high pressure treated and this water repellent slows down the rate of water absorption and evaporation, therefore ensuring the longevity of your deckboards.

At first the deckboards sport an even, green hue. Then time and weathering do their work, transforming them to their natural shade of honey brown; a process that means no further treatment is needed. The final colour is up to you- the boards can be painted or stained to match their surroundings.

2.4m x 2.5m CONTENTS:-

7 no. 2.4m x 100mm x 50mm joists
4 no. 540mm x 100mm x 50mm noggins
20 no. 2.4m x 120mm x 28mm grooved decking boards
2 no. 2.4m x 120mm x 28mm grooved decking boards to be used as fascias.
200 no. 60mm screws
36 no. 100mm screws

3m x 2.5m CONTENTS:-

2 no. 3m x 100mm x 50mm joists
6 no. 2.4m x 100mm x 50mm joists
5 no. 545mm x 100mm x 50mm noggins
19 no. 3m x 120mm x 28mm grooved decking boards
1 no. 3m x 120mm x 28mm grooved decking boards to be used for a facia
1 no. 2.4m x 120mm x 28mm grooved decking boards to be used for a facia
228 no. 60mm screws
44 no. 100mm screws

3.7m x 3m CONTENTS:-

2 no. 3m x 100mm x 50mm joists
6 no. 3.6m x 100mm x 50mm joists
5 no. 545mm x 100mm x 50mm noggins
29 no. 3m x 120mm x 28mm grooved decking boards
1 no. 3m x 120mm x 28mm grooved decking boards to be used for a facia
1 no. 3.6m x 120mm x 28mm grooved decking boards to be used for a facia
348 no. 60mm screws
44 no. 100mm screws

Tools required:- a power screwdriver/drill; a 4mm drillbit; a tape measure; a handsaw; a spirit level; and a
string line.

GROUNDWORK:-

The weekend deck kit needs to be placed on a flat surface. We can supply suggested base plans and recommend using 600mm x 600mm x 50mm paving slabs, set on 50mm thick mortar beds (not supplied). Mortar beds should be laid on compacted soil with turf removed. All slabs should be level, square and to the dimensions supplied on the base plans.

To avoid plant growth through the deck boards a weed suppressant should be used. These are available from most good garden centres or diy stores.

ASSEMBLY INSTRUCTIONS:-

1. Set out the 100 x 50mm joists as per base plan, on top of slab bases.
2. Pre drill end joists (4mm bit) and fix to joists using 100mm screws.
3. Set out noggins as shown in base plan, pre drill joists and fix using 100mm screws. Note: it may be necessary to cut the final noggin due to variation in timber sizes.
4. Lay out the120mm x 28mm grooved decking onto the frame. Align boards with outside of frame whilst leaving equal spaces between boards
5. Pre drill decking boards (4mm bit) and fix to joists using 60mm screws. Use the string line to keep all the screws in a straight line. Use 10no. screws for each length of decking, locating screws in the two outer grooves.
6. Fix the two facia boards in place to finish off the appearance of your deck.
7. The timber has been pressure treated to enhance the life of the deck. A further coat of a suitable coloured deck care product is recommended.