£
700 Series Analogue Aquatic Heater 3kW by Elecro
Top reasons to buy
- Reversible flow switch
- Robust, durable construction
- 316 Stainless Steel flow tube
- May be floor or vertically wall mounted
- Part of the 700 Series range by Elecro
- Free Delivery!
Analogue control with 1.5°C differential; available in 1kW to 8kW sizes; reversible flow switch; robust, durable construction; fully equipped. Ultra-reliable flow switch allows safe operation as low as 1m³/hour.
These heaters are very easy to install.
×
Ask a Question
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Product Detail
Available with or without a 24 hour time clock.
FEATURES:
- Analogue control with 1.5°C differential
- Available in 1kW to 8kW sizes
- Reversible flow switch
- Robust, durable construction
- Fully equipped
- Easy installation
- Stainless Steel heating elements
- 316 Stainless Steel flow tube
- Ultra-reliable flow switch allows safe operation as low as 1m³/hour
- May be floor or vertically wall mounted
- Analogue control thermostat 0-40°C (1.5°C differential)
- Safety thermal cut our 60°C (manual reset)
- 1½" BSP female threaded water connections
CONSTRUCTION:
The Elecro 700 Aquatic heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.
OPERATION:
The desired water temperature can be easily selected on the EVO heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
SPECIFICATION:
Minimum Flow Requirement: 1m³ (1,000-litres) per hour
Maximum Flow Velocity: 17m³ (17,000-litres) per hour
Heating Elements: Stainless Steel
Flow Tube: BS 316 Stainless Steel
Control Thermostat: 0ºC > 40ºC (1.5ºC Differential)
Contactor: Schneider Electric
Safety Thermal cut-out: 55ºC (Manual reset)
Flow Switch: Gold tipped reed switch with Titanium fulcrum pin
Wiring High temperature, silicone sheathed, multi-strand copper conductors
Seals: High temperature special formula polymer
Working Pressure: 4 Bar maximum
Water Connections: 1½" BSP female thread
Supplied ABS Unions: For 1½" / 50-mm rigid pipe
Supplied hosetails: For 1½" / 1¼" flexible pipe
Mounting Floor or wall mountable
Product Specification
| Brand: | Elecro | Range: | 700 Series |
| Code: | EHA-713 | Heating Output: | 3 kW |
People also bought
You May Also Like
Alternatives
Reviews
