£
900 Series Digital Aquatic Heaters by Elecro
Top reasons to buy
- Anti-cycle protection
- Robust, durable construction
- Titanium heating elements
- May be floor or vertically wall mounted
- Part of the 900 Series range by Elecro
- Free Delivery!
Digital control with 1.5°C differential; available in 1kW to 8kW sizes; reversible flow switch; robust, durable construction; fully equipped. Ultra-reliable flow switch allows safe operation as low as 1m³/hour.
Available with or without a 24 hour time clock. Supplied with Titanium heating elements as standard and a choice of Titanium or 316 Stainless Steel flow tubes.
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Product Detail
Available with or without a 24 hour time clock. Supplied with Titanium heating elements as standard and a choice of Titanium or 316 Stainless Steel flow tubes.
FEATURES:
- Digital control with 0.5°C differential
- Digital temperature display
- Anti-cycle protection
- Available in 2kW to 8kW
- Reversible Flow Switch
- Optional integrated 24-hour time clock
- Robust, durable construction
- Fully Equipped
- Easy Installation
- Titanium heating elements
- Titanium or 316 Stainless Steel flow tube
- Ultra-reliable flow switch allows safe operation as low as 1m³/hour
- May be floor or vertically wall mounted
- Digital control thermostat 0-40°C (0.5°C differential)
- Digital temperature display
- Safety thermal cut out 60°C (manual reset)
- 1½" BSP female threaded water connections
CONSTRUCTION:
The Elecro 900 Aquatic heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.
OPERATION:
The desired water temperature can be easily selected on the 900 Aquatic heater using the easily programmable digital thermostat. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
SPECIFICATION:
Minimum Flow Requirement: 1m³ (1,000-litres) per hour
Maximum Flow Velocity: 17m³ (17,000-litres) per hour
Heating Elements: Titanium
Flow Tube: BS 316 Stainless Steel or Titanium
Digital Control Thermostat: 0ºC > 40ºC (0.5ºC Differential)
Safety Thermal cut-out: 55ºC (Manual reset)
Flow Switch: Gold tipped reed switch with Titanium fulcrum pin
Wiring: High temperature, silicone sheathed, multi-strand copper conductors
Contactor: Schneider Electric
Seals: High temperature special formula polymer
Working Pressure: 4 bar maximum
Water Connections: 1½" BSP female thread
Supplied ABS Unions: For 1½" / 50-mm rigid pipe
Supplied Hosetails: For 1½" / 1¼" flexible pipe
Mounting: Floor or wall mountable
Product Specification
| Brand: | Elecro | Range: | 900 Series |
| Code: | 900 |
Reviews
