£
Vulcan Titanium Heat Exchangers by Elecro
Top reasons to buy
Available in four sizes, from 25kW (85,000 BTU) to 100kW (341,000 BTU).
Robust, durable construction; Titanium tube bundle; straight through water path; 316 Stainless Steel shell with special polyamide fittings; can be floor or vertically wall mounted.
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Product Detail
Available in four sizes, from 25kW (85,000 BTU) to 100kW (341,000 BTU).
FEATURES:
- Robust, durable construction
- Titanium tube bundle
- Straight through water path
- 316 Stainless Steel shell with special polyamide fittings
- May be floor or vertically wall mounted
CONSTRUCTION:
The Elecro heat exchanger is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a densely populated multi-tubular pure Titanium tube bundle which is secured by the purpose designed polyamide / rubber tube sheet. The heat exchanger shell is constructed from BS 316 Stainless Steel this is capped at each end with primary and secondary moulded fittings manufactured from specially formulated polymer alloy material.
The heat exchanger is supported on two swivel feet; to facilitate either wall or floor mounting.
The heat exchanger is supplied complete with:
- 2 x 1" male/male Brass primary connections
- 1 x 1" Brass Non-return valve
- 1 x Titanium thermostat pocket
- 1 x Blanking cap & coin gasket (for non-thermostat side)
This Elecro heat exchanger has been designed to allow the installation engineer to select which way to plumb the primary and secondary water to achieve maximum thermal gain, this is achieved by routing the primary (HOT) flow in an opposing direction to the secondary (POOL) water.
OPERATION:
This Elecro heat exchanger is installed in the pool filtration circuit from which water passes through the tube side of the heat exchanger. Water from the primary heating circuit flows counter current through the shell side of the exchanger, heating the swimming pool water.
Elecro heat exchangers are ideal for use with gas or oil fired boiler circuits, solar panels, heat pumps or chillers.
SPECIFICATION:
Tube bundle: Pure Titanium
Water connections: 1½" or 50-mm rigid pipe
Heating circuit connections: 1" BSP
Maximum operating pressure: 4 bar
Mounting: Floor or wall mountable
HORIZONTAL INSTALLATION:
VERTICAL INSTALLATION:
Product Specification
| Brand: | Elecro | Range: | Vulcan |
| Code: | V-HE-xxT |
You May Also Like
Reviews
