Intex Easy Set Inflatable Pool 10ft x 30" No Pump - 28120
* We aim to deliver by our estimated delivery dates, however they can't be guaranteed.
- High quality, easy to assemble pool
- Can be installed ready for filling with water within 10 minutes
- Manufactured using the highest quality PVC
- Close-weave nylon webbing used for reinforcement
- Pool Diameter: 10ft
- Pool Depth: 30in
- Helpful Telephone Support
Intex recognizes that as your family grows then so will your pools requirements, and the Intex Easy Set Inflatable Pool measuring 10ft dia by 30" depth is an ideal step up from their smaller starter pools. It is an ideal pool for an expanding family. It comes with no pump, but this aids its fast setup, which can see this inflatable pool unpacked and being filled up with water within 10 minutes of it arriving. Whilst low cost, this pool is made to the same high quality as Intex's large pools are, with just the same quality PVC used.
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Intex Easy Set Pool 10ft diameter x 30 inches deep.
Intex's beautiful Easy Set Pools will ensure that you enjoy seasons of garden family fun! Intex have brought years of enjoyment to millions of people around the world. Their high quality, easy to assemble inflatable pools are the best value on the market today. An inflatable pool can be installed ready for filling with water within 10 minutes.
Width: 10ft (305cm)
Height: 30" (76cm)
Outer Diameter: 9ft 6" (290cm)
Inner Diameter: 8ft 2" (249cm)
Recommended Water Depth: 23" (58cm)
The Easy Set pool is available in a number of sizes and depths. The 8', 10' and 12' inflatable pools are great for smaller children, small gardens, and for families making their first purchase. The 15' diameter Easy Set pool is available in 3 popular heights.
The Intex Easy Set Inflatable Pool is manufactured using the highest quality PVC, and is several times stronger than the other makes available on the market due to the close-weave nylon webbing that is used for re-enforcement.
This pool is supplied without a pump, although this is available as an option in the accessory list above.
A variety of heating options are available from the simple to use 3KW Intex heater to the high quality Elecro stainless steel heaters. A cost-effective solar panel kit is also available.
Please note; if opting for the Solar Heating Kit, this pool will require two panels for optimum effect.
Don't forget the chemical treatment kits and replacement cartridge filters, to extend the life of your inflatable pool water!
PLEASE NOTE: All filter pump units must be placed 2 metres away from the inflatable pool. We recommend that filtration is turned OFF when the pool is in operation. We recommend a smooth concrete slab as a suitable base- contact a reputable local builder for advice on local soil conditions. Failure to set up the pool on a flat, level compact ground could result in the pool's collapse or the possibility that a person lounging in the pool could be swept out. Do not lean, straddle or exert pressure on the inflatable pool top ring or top rim as injury or flooding could occur. Do not sit on, climb or straddle the sides of the inflatable pool.
WARRANTY: This product is covered by a manufacturer's warranty. The liner is covered for 3 months and the electrical components for 1 year. There is no warranty on inflatable parts or accessories. In the event of a product failure a claim can only be made through the relevant warranty line. Please note that the manufacturer will only replace the faulty component.
|Brand:||Intex Pools||Box Length:||289.6 mm|
|Box Height:||424.2 mm||Box Width:||226.1 mm|
Use code "SplashC1" to get 5% off* your basket.
This product will be .