£
Booster Pump 0.5HP
Top reasons to buy
- Allows pools using cartridge filter systems to use solar power
- Made by Splash & Relax
- Free Delivery!
For in-ground pools and above ground pools using sand filters it is likely that the existing pressure would be sufficient to allow the addition of a solar system. However, for smaller pools using a cartridge filter pump, this is unlikely to be the case. In the event that there is not enough water pressure you will need to invest in a booster pump and optional sun sensor.
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Product Detail
In many situations a pool's current filtration system would have adequate pressure to supply water to the solar collector, normally up to 8 metres high. Your water flow pressure is very dependent on the power of the filtration pump, plumbing configuration etc. For in-ground pools and above ground pools using sand filters it is likely that the pressure would be sufficient to allow the addition of a solar system. However, for smaller pools using a cartridge filter pump, this is unlikely to be the case.
If you are unsure about the necessity for a booster pump, try using your existing filtration first!
In the event that there is not enough water pressure you will need to invest in a booster pump and optional sun sensor. The booster pump will require a water supply utilising the Main Drain suction line.
If a Booster Pump is to be installed on your solar system it is worth investing in a sun sensor that will enable you to gain the optimum heat energy available from the sun. A sun sensor is an electronic thermostat that will operate the Booster Pump when solar heat is available. In the event that there is no solar heat e.g. after dusk the control sensor will turn off the Booster Pump.
Product Specification
| Brand: | Splash & Relax | Code: | 1541-X |
You May Also Like
Reviews
