2.2kW Pool Heater For Above Ground Pools - 28684 by Intex
Top reasons to buy
- 2.2KW output
- Easy set-up and operation
- Water level sensor
- For new pools or for retro-fitting
- Made by Intex Pools
- Free Delivery!
NEW 2021 SEASON STOCK NOW AVAILABLE.
This above ground pool heater from market-leading brand Intex is compatible with Easy Set, Fast Set, Pro Frame and Metal Frame above ground pools up to 12ft in diameter and up to 30 inches deep that use 32mm flexible hoses and jubilee clips.
NOTE: this item is not suitable for use with extension leads and requires a filter pump with a flow rate of 500 - 2500 gallons/hour (1893 - 9464 litres/hour).
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
The 28684 pool heater from Intex is compatible with Easy Set, Fast Set, Pro Frame and Metal Frame above ground pools up to 12ft diameter by 30 inches deep that use flexible hose and jubilee clips for connecting the pump to the pool.
- 2.2kW output heater
- 220-240 volts
- Easy set up and operation
- Water level sensor
- Suitable for use with new pools and retrofitting
- Requires a filter pump with a flow rate of between 500 and 2500 gallons per hour (1893-9464 litres/hour)
- Weight: 3.7kg
With the Intex 28684 pool heater, you can enjoy your outdoor above ground swimming pool even on the chillier evenings. This heater will warm the water up to 35°C and is an easy to install and maintain heating system.
The Intex 28684 heater has a rapid heating system that will raise the temperature by approximately 0.5°C per hour (for a 12 foot x 30 inch inflatable swimming pool). Please note, this is a guide only as mains water temperature, heat loss, ambient air temperature and other factors will affect this.
This item is not suitable for use with extension leads.
This item is covered for 1 year. In the event of a product failure a claim can only be made through the relevant warranty line. Please note that refunds are not available for alleged faulty goods- the manufacturer will only replace the faulty component part or item.
|Brand:||Intex Pools||Alternative Product Codes:||(28684), 28684|
|Box Length:||250 mm||Box Height:||500 mm|
|Box Width:||250 mm||Code:||28684BS|
|Heating Output:||2.2 kW|
Perfect, just as we expected, our pool is lovely now, Thanks.