Easy Set Inflatable Pool - 28110 - 8ft x 30in (No Pump) by Intex
* We aim to deliver by our estimated delivery dates, however they can't be guaranteed.
Top reasons to buy
- High quality, easy to assemble pool
- Can be installed ready for filling with water within 10 minutes
- Manufactured using the highest quality PVC
- Close-weave nylon webbing used for reinforcement
- Pool Diameter: 8ft
- Pool Depth: 30in
- Made by Intex Pools
The great thing about Intex Pools large or small is that they are all made with the same high quality materials and to the same high standards. So this means that this Intex Easy Set Inflatable Pool at 8ft x 30" is just as good as its older brothers that measure a massive 18ft in diameter. If you are considering this as your first inflatable pool then be aware that the Easy Set pool range is called that because they are so easy to erect. Indeed you can be starting to fill this pool with water in under 10 minutes from it arriving.
If you have a question about this product, please use the area below, click 'SUBMIT' when you're done and we'll get back to you ASAP!
Intex's beautiful Easy Set Pools will ensure that you enjoy seasons of garden family fun! Intex have brought years of enjoyment to millions of people around the world. Their high quality, easy to assemble pools are the best value on the market today. A pool can be installed ready for filling with water within 10 minutes.
Width: 8ft (244cm)
Height: 30" (76cm)
Outer Diameter: 7ft 7" (231cm)
Inner Diameter: 6ft 5" (196cm)
Recommended Water Depth: 23" (58cm)
Water capacity at 80% full : 639 gallons (2.4m3)
The Easy Set pool is available in a number of sizes and depths. The 8', 10' and 12' pools are great for smaller children, small gardens, and for families making their first purchase. The 15' diameter Easy Set pool is available in 3 popular heights.
The Intex Easy Set Pool is manufactured using the highest quality PVC, and is several times stronger than the other makes available on the market due to the close-weave nylon webbing that is used for re-enforcement.
Please note this item is supplied without a pump, which is available as an optional extra.
A variety of heating options are available from the simple to use 3KW Intex heater to the high quality Elecro stainless steel heaters. A cost-effective solar panel kit is also available. A filter pump will be required to run a heater with this pool.
Don't forget the chemical treatment kits and replacement cartridge filters, to extend the life of your pool water!
PLEASE NOTE: All filter pump units must be placed 2 metres away from the pool. We recommend that filtration is turned OFF when the pool is in operation. We recommend a smooth concrete slab as a suitable base- contact a reputable local builder for advice on local soil conditions. Failure to set up the pool on a flat, level compact ground could result in the pool's collapse or the possibility that a person lounging in the pool could be swept out. Do not lean, straddle or exert pressure on the inflatable top ring or top rim as injury or flooding could occur. Do not sit on, climb or straddle the sides of the pool.
WARRANTY: This product is covered by a manufacturer's warranty. The liner is covered for 3 months and the electrical components for 1 year. There is no warranty on inflatable parts or accessories. In the event of a product failure a claim can only be made through the relevant warranty line. Please note that the manufacturer will only replace the faulty component.
|Brand:||Intex Pools||Box Length:||297.2 mm|
|Box Height:||386.1 mm||Box Width:||177.8 mm|
Use code "SplashC1" to get 5% off* your basket.
This product will be .